BRISK SILVER RACING L11SL/1531 spark plug
BRISK SILVER RACING L11SL/1531 spark plug

BRISK SILVER RACING L11SL/1531 spark plug

Article no.: 102203A
Manufacturer: BRISK

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

BRISK SILVER RACING L11SL/1531 Spark plug

Safety instructions and warnings

Safety instructions for BRISK SILVER RACING L11SL/1531 spark plug:

  1. To avoid injury, make sure the engine has cooled down before replacing the spark plug.
  2. Make sure that the ignition key is removed and the engine is switched off before you start replacing the spark plug.
  3. Use suitable protective equipment such as gloves and safety goggles to protect yourself from injuries caused by flying particles.
  4. Before replacing the spark plug, remove any dirt or deposits from around the spark plug area to ensure proper installation.
  5. Make sure the spark plug meets the correct specifications (model number, heat rating, etc.) for your vehicle. Consult the manufacturer's instructions or contact an authorised dealer if you are unsure.
  6. Never use a damaged or defective spark plug. Replace it immediately to prevent damage to the engine.
  7. Do not overtighten the spark plug to avoid damage. Observe the tightening torques recommended by the manufacturer.
  8. Do not use any additional lubricants or thread sealants on the spark plug unless this is expressly recommended by the manufacturer.
  9. Keep children and pets away while replacing the spark plug to avoid accidents.
  10. Ensure that the spark plug is properly installed and firmly seated before starting the engine.
Manufacturer contact information

Manufacturer Contact

BRISK a.s. Tabor
Vozicka 2068
CZ 390 02 Tabor
https://www.brisk.cz/kontakty/centrala

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.