Filter cartridge for DTG gas filter (gaseous phase)
Filter cartridge for DTG gas filter (gaseous phase)

Filter cartridge for DTG gas filter (gaseous phase)

Article no.: 100247
Manufacturer: DT GAS

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Material

Height in mm (h)

Outer diameter in mm (D)

Inner diameter in mm (d)

Shut-off valves

reducer

Systems

References

27,0

38,0

6,0

-

-

-

-

Safety instructions and warnings

Safety instructions for filter insert for DTG gas filter (gas phase)

  1. Read the manufacturer's instructions carefully before using the filter insert for DTG gas filters (gas phase).
  2. Ensure that the filter insert is properly installed and firmly seated to ensure safe use.
  3. Ensure that the filter element is serviced regularly to achieve optimum performance and minimise potential safety risks.
  4. Only use the filter element for its intended purpose and observe the recommended maximum operating time.
  5. Follow the specified replacement intervals for the filter element to ensure effective filtration.
  6. Keep the filter element away from heat sources, open flames or other potential sources of fire.
  7. Do not remove the filter element while the DTG gas filter is in operation.
  8. Check the condition of the filter element regularly and replace it if there are signs of damage or wear.
  9. Keep the area around the filter insert clean and free of dirt.
  10. In the event of accidents or improper handling of the filter insert, contact the manufacturer or follow the recommended measures in the manufacturer's safety instructions.
Manufacturer contact information

EU Contact

HybridSupply GmbH

Roggenhorsterstr. 9b

23556 Lübeck

https://hybrid.supply/contact