BRISK SUPER R - YTTRIUM  DR17YC spark plug
BRISK SUPER R - YTTRIUM  DR17YC spark plug

BRISK SUPER R - YTTRIUM DR17YC spark plug

Article no.: 101962A
Manufacturer: BRISK

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

BRISK SUPER R - YTTRIUM DR17YC spark plug

Safety instructions and warnings

Safety instructions for BRISK SUPER R - YTTRIUM DR17YC spark plug:

1. carefully read all the manufacturer's instructions and warnings before installing and using the spark plug.

2 Ensure that the engine is switched off and has cooled down before replacing the spark plug.

3. use suitable protective equipment such as gloves and safety goggles to avoid injury.

4. ensure that the spark plug has the correct heat rating for your engine.

5. regularly check the condition of the spark plug to detect wear or damage. Replace them if necessary.

6. keep the spark plug clean and free of dirt, oil or other deposits.

7. never use force to install or remove the spark plug. Make sure to tighten it properly, but not too tight.

8. observe the vehicle manufacturer's recommendations for the spark plug replacement interval.

9. use only original or recommended spare parts to ensure optimum performance and safety.

10. if you have any questions or are unsure about the installation or use of the spark plug, contact a specialist or the manufacturer.

Manufacturer contact information

Manufacturer Contact

BRISK a.s. Tabor
Vozicka 2068
CZ 390 02 Tabor
https://www.brisk.cz/kontakty/centrala