- Product description
BRISK Silver LPG/ CNG DOR15YS
Width across flats: 16 mm
External thread: 21 mm
Thread diameter: M 14 x 1.25 mm
Electrode gap: 0.7 mm
Torque: 20-30 Nm
Replacement interval: max. 30,000 km
Brisk code: 1302
The BRISK Silver Line has been specially designed for the requirements of LPG/CNG fuelled vehicles. The silver centre electrode has a smaller diameter than conventional spark plugs and significantly reduces the voltage requirement due to its small electrode gap.
BRISK Silver spark plugs can be used in both petrol and gas-powered vehicles.
You can find the current BRISK catalogue and a selection guide in our download area by clicking here.
Safety instructions and warnings
Safety instructions for BRISK SILVER LPG DOR15YS spark plug:
1. read the manufacturer's instructions carefully before installing and using the spark plug.
2 Ensure that the engine has cooled down before replacing the spark plug.
3. disconnect the spark plug leads from the old spark plug before removing it.
4. make sure that the engine is switched off and the ignition key is removed before you start installing the new spark plug.
5 Only use the recommended spark plug for your vehicle model.
6. make sure that the spark plug is correctly inserted and firmly tightened to ensure proper operation.
7. avoid contact with flammable liquids or materials in the vicinity of the spark plug.
8. regularly check the condition of the spark plug and replace it if there are signs of wear or damage.
9. observe the specific maintenance requirements and intervals according to the manufacturer's recommendations.
10. wear suitable protective equipment such as gloves and safety goggles when handling the spark plug.
11 Dispose of the old spark plug in accordance with local regulations for hazardous waste.
12. keep the spark plug out of the reach of children and pets.
Manufacturer contact information
Manufacturer Contact
BRISK a.s. Tabor
Vozicka 2068
CZ 390 02 Tabor
https://www.brisk.cz/kontakty/centrala