BRISK EXTRA DR17TC spark plug

Safety instructions for BRISK EXTRA DR17TC spark plug:

1. read and follow the vehicle manufacturer's instructions before installing the spark plug.

2. the spark plug may only be installed by qualified specialists or an authorised workshop.

3. when installing the spark plug, ensure that it is correctly positioned and firmly tightened.

4. before installation, ensure that the spark plug is clean and free from damage.

5. do not use force during installation and ensure that no foreign objects enter the cylinder.

6. allow the engine to cool down before removing the old spark plug to avoid burns.

7. check the spark plug regularly for wear and replace it in good time if necessary.

8. always observe the manufacturer's specifications regarding torque when replacing the spark plug.

9. make sure you select the correct spark plug in accordance with the manufacturer's recommendations for your vehicle.

10. do not handle, disassemble or modify the spark plug improperly.

11. do not coat the spark plug with oil, lubricant or other substances.

12. consult a specialist immediately in the event of problems or uncertainties when installing or using the spark plug.

13. the spark plug must not be replaced while the engine is running.

14 After installing and replacing the spark plug, check the engine for correct operation.

15. dispose of the old spark plug in accordance with local environmental regulations.