- Product description
- Spare parts
- Accessories
Technical data Valtek T30 STD Rail | |
| Operating voltage | 12-16 V |
| Input connection | ø12 mm |
| Resistance | 1.0 Ohm |
| Opening at 0.1MPa | 3.1 ms |
| Closing at 0.1MPa | 1.8 ms |
The colour of the solenoid coils may vary, the resistance (1 Ohm) is important.
Area of application:
Valtek T30 is used in numerous systems, e.g. KME, STAG, ZENIT and others.
Scope of delivery:
1x VALTEK 2 cylinder injector coil 1 Ohm (yellow) including accessories (without injector nozzles!)
Homologation and manufacturer numbers:
Injectors: E4 67R - 010104
Safety instructions and warnings
Safety instructions for Valtek LPG injector CNG type 30 STD 1 Ohm 2 cylinder:
1. read the manufacturer's instructions carefully before using the product.
2. ensure that the product is properly installed and connected to avoid accidents.
3. use the product only for the recommended purposes.
4. ensure that the product has no damaged or worn parts. If in doubt, contact the manufacturer.
5 Keep the product away from flammable materials and open flames.
6. regularly check the condition of the product and, if necessary, carry out maintenance work in accordance with the manufacturer's instructions.
7. observe all applicable legal regulations and safety standards for the operation of the product.
8. use suitable protective equipment such as gloves and safety goggles when handling the product.
9. switch off the product before carrying out maintenance work or cleaning.
10. keep the product out of the reach of children and do not leave it unattended.
Manufacturer contact information
VALTEK:
Westport Fuel System Italia s.r.l.
Via La Morra, 1
12062 Cherasco CN
Italy
info.valtek@wfsinc.com
