- Product description
- Spare parts
- Accessories
Technical data Magic Jet injector | |
Working pressure | from 0.5 to 4.5 bar |
Max. pressure | - |
Operating voltage | 10-15 V |
Inlet connection | 6mm |
Connection at output | 6mm |
Temperature range | -20° / + 120° C |
Resistance | 2.0 Ohm |
Minimum injection time | 4.0 ms |
Open | 2.2 ms |
Close | 1.0 ms |
Homologation | E20 67R-01 0738 |
Safety instructions and warnings
Safety instructions for Magic Jet LPG injector CNG
- Ensure that the product is properly installed and complies with safety standards.
- Only use approved and compatible fuels for the Magic Jet LPG injector CNG.
- Observe the maximum pressure and temperature limits of the product to avoid possible damage or accidents.
- Carry out regular inspections to ensure that all components of the Magic Jet injector are working properly.
- Keep the product clean and free of debris to ensure optimum performance.
- Follow all manufacturer's instructions for maintenance and servicing of the Magic Jet Injector.
- Avoid improper handling or manipulation of the product to prevent injury or damage.
- If problems or uncertainties arise, contact the manufacturer or an authorised specialist.
- Comply with all applicable safety regulations and guidelines when using the Magic Jet LPG injector.
Manufacturer contact information
Manufacturer Contact
HL propan s.r.o.
Štramberská 2905,
703 00 Ostrava - Vítkovice
Czech republic.
info@hlpropan.cz
