Valtek injector rail  STD 3 ohm type 30  (2 cyl.)
Valtek injector rail  STD 3 ohm type 30  (2 cyl.)

Valtek injector rail STD 3 ohm type 30 (2 cyl.)

Article no.: 100191
Manufacturer: VALTEK

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description
  • Spare parts
  • Accessories

Technical data Valtek T30 STD Rail

Operating voltage
12-16 V
Input connection
ø12 mm
Resistance
3.0 Ohm
Opening at 0.1MPa
3.1 ms
Closing at 0.1MPa
1.8 ms


The colour of the solenoid coils may vary, the resistance (3 Ohm) is important.

Area of application:

Valtek T30 is used in numerous systems, e.g. KME, STAG, ZENIT and others.

Scope of delivery:

1x VALTEK 2 cylinder injector coil 3 Ohm (red) including accessories (without injector nozzles!)

Homologation and manufacturer numbers:

Injectors: E4 67R - 010104

Safety instructions and warnings

Safety instructions for Valtek LPG injector CNG type 30 STD 3 Ohm 2 cylinder:

- Before installing and commissioning the injector, the enclosed instructions must be read and understood completely and carefully.

- Installation, repair and maintenance of the injector may only be carried out by trained specialist personnel.

- The injector may only be used on suitable, approved and certified LPG and CNG systems.

- The injector must not be manipulated or modified.

- The injector must not be installed near sources of ignition or hot surfaces.

- The injector must not be operated in areas with explosive or flammable substances.

- If problems or irregularities occur during operation of the injector, a specialist must be consulted immediately.

Manufacturer contact information

VALTEK:

Westport Fuel System Italia s.r.l.

Via La Morra, 1

12062 Cherasco CN

Italy

info.valtek@wfsinc.com