Injector nozzle M7 for Matrix HD rail - L. 30 mm D. 6 mm
Injector nozzle M7 for Matrix HD rail - L. 30 mm D. 6 mm
Injector nozzle M7 for Matrix HD rail - L. 30 mm D. 6 mm
Injector nozzle M7 for Matrix HD rail - L. 30 mm D. 6 mm

Injector nozzle M7 for Matrix HD rail - L. 30 mm D. 6 mm

Article no.: 100564A
Manufacturer: MATRIX

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description
Injection nozzle for Matrixrail - M 7 Diameter: 6mm / inside 1.0-2.7 Total length: 30mm Weight: 0.005kg

Safety instructions and warnings

Safety instructions for injector nozzle M7 D.6mm L.30mm - for Matrix HD Rail

  1. Before using the injector nozzle, please read the manufacturer's instructions carefully.
  2. Make sure that the injector nozzle is properly installed and that all connections are tightened.
  3. Only use the injector nozzle for its intended purpose and in accordance with the manufacturer's specific instructions.
  4. Wear suitable protective equipment such as gloves and safety goggles when handling the injector nozzle.
  5. Keep the injector nozzle away from children and unauthorised persons.
  6. Check the condition of the injector nozzle regularly and replace it if there are signs of wear or damage.
  7. Do not use the injector nozzle if it is defective or not working properly.
  8. Avoid contact with sharp edges or aggressive chemicals that could damage the injector nozzle.
  9. Switch off the power supply to the device before carrying out maintenance work on the injector nozzle.
  10. Follow the applicable safety regulations and guidelines when operating the injector nozzle.
Manufacturer contact information

The manufacturer

Matrix S.p.A.

Corso Vercelli 330

10015 Ivrea - (Turin)

Italy

info@matrix.to.it