FARO 90° elbow M10x1 thread for 6 mm thermoplastic hose (R01)
FARO 90° elbow M10x1 thread for 6 mm thermoplastic hose (R01)

FARO 90° elbow M10x1 thread for 6 mm thermoplastic hose (R01)

Article no.: 100795P
Manufacturer: FARO

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Safety instructions and warnings

Safety instructions for FARO elbow 90° M10x1 thread for thermoplastic hose 6mm (R01)

- Before using the FARO elbow 90° M10x1 thread for thermoplastic hose 6mm (R01), please read the manufacturer's instructions.

- Only use the elbow for its intended purpose.

- Before connecting the contra-angle handpiece, ensure that the thermoplastic hose is properly installed and fastened.

- Do not overload the contra-angle handpiece and do not exceed the specified maximum load.

- Thoroughly clean the tool and the threaded connections before screwing the contra-angle handpiece.

- When tightening the threaded connections, use the correct torque in accordance with the manufacturer's specifications.

- Check the contra-angle handpiece regularly for damage and wear. If there are signs of damage, stop using the contra-angle handpiece and replace it with a new one.

- Do not use the contra-angle handpiece in the vicinity of flammable materials or in potentially explosive atmospheres.

- Always wear suitable protective equipment such as gloves and safety goggles when handling the contra-angle handpiece.

- Keep the contra-angle handpiece out of the reach of children.

- If you are unsure or have any questions about the safe use of the contra-angle handpiece, please contact the manufacturer.

Manufacturer contact information

Contact manufacturer

OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it