FARO PREMIUM thermoplastic hose 6 mm (3/16") - 6-meter kit (FAK396)

Safety instructions for FARO PREMIUM thermoplastic hose 6mm (3/16") - 6 metre KIT (FAK396)

1. intended use:

The FARO PREMIUM thermoplastic hose 6mm (3/16") - 6 metre KIT (FAK396) is intended exclusively for its intended use. It must not be misused or used for other applications.

2. installation:

Installation of the thermoplastic hose should only be carried out by qualified personnel. Ensure that the thermoplastic hose is installed properly and in accordance with the manufacturer's instructions.

3. maintenance and inspection:

Perform regular inspections of the thermoplastic hose to ensure that it is in good condition. Any dirt or damage should be repaired immediately. Maintain the thermoplastic hose in accordance with the manufacturer's instructions.

4. operating instructions:

a) Only use the thermoplastic hose within the specified temperature and pressure limits.

b) Do not use the flex line system if it is damaged or shows signs of wear.

c) Avoid excessive bending loads and sharp kinks to prevent damage to the thermoplastic hose.

d) Keep the thermoplastic hose away from sharp edges, hot surfaces and chemical substances.

e) Do not remove any protective devices or safety labelling from the thermoplastic hose.

5 Disposal:

Dispose of the thermoplastic hose in accordance with local regulations and environmental regulations to ensure proper disposal.

Please note that this is only a summary of the relevant safety and operating instructions. Be sure to read the complete manufacturer's instructions and safety information to ensure that you use the thermoplastic hose correctly.