- Product description
Material | Height in mm (h) | Outside diameter in mm (D) | Inside diameter in mm (d) | Shut-off valves | Systems | References |
Plastic | 20,5 | 31,0 | 8,0/10,0 | Valtek (01, 02, 03, 07 standard, 07 BFC), Elpigaz (GLP 01, 03), Milano, OMB (Diana, Alfea) | Prins, Emmegas, Stag, KME, Zavoli, Elpigaz, AG Centrum, Milano, OMVL | - |
Safety instructions and warnings
Safety instructions for filter element for Valtek incl. seal kit (liquid phase)
- The system must be completely drained before installing the filter insert for Valtek including sealing kit (liquid phase).
- The filter insert must be installed in accordance with the manufacturer's instructions.
- Before maintenance work, the filter insert and the system must be completely drained.
- Ensure that the system is completely drained and that there is no pressure before removing or replacing the filter element.
- Regularly check the condition of the seal set and replace it if necessary.
- Only use spare parts recommended by the manufacturer and ensure that the filter element is suitable for the liquid to be filtered.
- Ensure that all connections and hoses are properly tightened.
- Observe the safety instructions in the operating instructions for the system and comply with all applicable safety regulations.
Manufacturer contact information
VALTEK:
Westport Fuel System Italia s.r.l.
Via La Morra, 1
12062 Cherasco CN
Italy
info.valtek@wfsinc.com