DREHMEISTER Intake manifold nozzle 90° M6 (d. 5 mm)
DREHMEISTER Intake manifold nozzle 90° M6 (d. 5 mm)

DREHMEISTER Intake manifold nozzle 90° M6 (d. 5 mm)

Article no.: 100730
Manufacturer: DREHMEISTER

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

LPG screw-in nozzle for the intake manifold with 90° outlet angle and hexagon socket

Technical Data

Angle at outlet: 90°
Hose connection: 5 mm
Thread: M6

Safety instructions and warnings

Safety instructions for DREHMEISTER manifold nozzle 90° M6 D.5mm L.36mm:

- Wear suitable protective gloves when installing the manifold nozzles.

- Before installation, check that the threads of the manifold nozzle and the corresponding component are free of dirt, oil or other contaminants.

- Make sure that the manifold nozzle is properly screwed into the component and is firmly seated.

- Observe the specified maximum load limit for the manifold nozzle.

- Do not use damaged or deformed manifold nozzles.

- Check the condition of the manifold nozzle regularly and replace it if there are signs of wear or damage.

- Observe the applicable safety regulations and follow the manufacturer's instructions.

Manufacturer Contact information

Contact manufacturer

HybridSupply GmbH

Roggenhorsterstr. 9b

23556 Lübeck

https://hybrid.supply/contact