- Product description
Worm drive clamp 126 W2
Band and housing made of stainless steel, material no. 1.4016/UNS S43000 Hexagon head screw made of galvanised steel
Technical data
| Tension range | Band width 9mm | Band width 12mm |
|---|---|---|
| Static tightening torque | ||
| 8 - 22 mm | 2 + 0.5 Nm | |
| 16 - 160 mm | 3 + 0.5 Nm | |
| 16 - 390 mm | 5 + 0.5 Nm | |
| Static test torque | ||
| 8 - 22 mm | max. 2.5 Nm | |
| 16 - 160mm | max. 4.5 Nm | |
| 16 - 390mm | max. 6.5 Nm |
Safety instructions and warnings
Safety instructions for Oetiker worm drive clamp 12-20mm (diameter range) / 9mm (Band width) W2:
- Ensure that the worm drive clamp is properly installed and tight to ensure secure fastening of pipes or hoses.
- Only use the worm drive clamp for its intended purpose and within the specified limits.
- Regularly check the condition of the worm drive clamp, in particular the strength of the screw and the band. If there are signs of wear or damage, the clamp should be replaced.
- Make sure that the worm drive clamp is not overloaded to avoid damage or breakage.
- Observe the specified tightening torques for the screw to ensure a secure and reliable connection.
- Keep the worm drive clamp away from heat sources and aggressive chemicals to prevent possible material damage.
- Wear suitable protective equipment, such as gloves and eye protection, when installing and maintaining the worm drive clamp.
- Read the manufacturer's instructions and safety instructions carefully before using the worm drive clamp and follow them.
Manufacturer contact information
Contact manufacturer
Oetiker Switzerland AG
Spätzstrasse 11
P.O. Box 358
CH-8810 Horgen
https://www.oetiker.com/de-de/contact-us
EU Contact
Oetiker Germany GmbH
Üsenbergerstr. 13
79346 Endingen
Endingen Germany
https://www.oetiker.com/de-de/contact-us