IG1 Apache 4 cylinder Rail 3 ohm
IG1 Apache 4 cylinder Rail 3 ohm

IG1 Apache 4 cylinder Rail 3 ohm

Article no.: 100483
Manufacturer: RAIL

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description
  • Spare parts
  • Accessories

Homologation number E8 67R-01 4303

Technical data IG1 Apache Rail

Working pressure
from 0.5 to 2.0 bar (max 3.0 bar)
Maximum pressure
3.0 bar
Operating voltage
10,8-14,4 V
Inlet connection
ø12 mm
Connections at the outlet
Pre-drilled nozzles M8x1
Temperature range
-20° / + 120° C
Resistance
3.0 Ohm
Minimum injection time
3.3 ms
Open
3.7 ms*
Close
2.8 ms*




* tested at 1 bar pressure 12V and 5ms total injection time

Safety instructions and warnings

Safety instructions for RAIL LPG injector CNG IG1 Apache 4 cylinder 3 Ohm

1. general safety instructions:

  • Only operate the RAIL injector in accordance with the manufacturer's instructions.
  • If you do not operate the RAIL injector correctly, this can cause damage to property and injuries.
  • Do not use the RAIL injector if it is damaged or shows signs of wear.
  • Ensure that the RAIL Injector is operated in a well-ventilated area.
  • Keep children and pets away from the RAIL Injector.
  • Avoid smoking or naked flames in the vicinity of the RAIL Injector.
  • Keep the RAIL Injector away from flammable materials.

2. safety instructions for operation:

  • The RAIL Injector may only be installed by qualified personnel.
  • Ensure that the RAIL injector is properly connected to the vehicle.
  • Only use approved LPG or CNG tanks with the RAIL injector.
  • Regularly check the condition of the RAIL injector and carry out maintenance work if necessary.
  • Do not make any changes to the RAIL injector unless they are authorised modifications.

3. safety instructions in the event of faults:

  • If you have problems with the RAIL Injector, contact an authorised service technician.
  • Do not attempt to repair the RAIL Injector yourself if you do not have the necessary knowledge and experience.
  • Ensure that the RAIL injector has cooled down completely before starting maintenance work.
Manufacturer contact information

Rail S.r.l.

Via A. Grandi, 16

42030 Vezzano Sul Crostolo (RE)

Italy

+39 0522 603 801

info@railgroup.it