- Product description
- Accessories
Homologation number E8 67R-01 4303
Technical data IG1 Apache Rail | |
Working pressure | from 0.5 to 2.0 bar |
Maximum pressure | 3.0 bar |
Operating voltage | 10,8-14,4 V |
Inlet connection | ø12 mm |
Connections at the outlet | Pre-drilled nozzles M8x1 |
Temperature range | -20° / + 120° C |
Resistance | 3.0 Ohm |
Minimum injection time | 3.3 ms |
Open | 3.7 ms* |
Close | 2.8 ms* |
* tested at 1 bar pressure 12V and 5ms total injection time
Safety instructions and warnings
Safety instructions for RAIL injector LPG CNG IG1 Apache 3 cylinder 3 Ohm
- Always switch off the power supply before installing or servicing the RAIL injector.
- Ensure that the vehicle is properly supported before starting to install the RAIL injector.
- Read all instructions in the manufacturer's manual carefully before starting installation or maintenance of the product.
- Only use replacement parts and accessories recommended by the manufacturer.
- Keep the product away from heat sources, open flames and flammable materials.
- Regularly check the condition of the RAIL Injector and carry out maintenance work as required in accordance with the manufacturer's instructions.
- Ensure that all connections are properly fastened and sealed to prevent leaks.
- Wear suitable protective equipment such as gloves and safety goggles when working with the RAIL injector.
- Observe the specific safety and operating instructions in the manufacturer's manual for the RAIL injector LPG CNG IG1 Apache 3 cylinder 3 Ohm.
Manufacturer contact information
Rail S.r.l.
Via A. Grandi, 16
42030 Vezzano Sul Crostolo (RE)
Italy
+39 0522 603 801
info@railgroup.it