- Product description
- Spare parts
- Accessories
Safety instructions and warnings
Safety instructions for ZETA S reducer with T-sensor (1.4 bar to 250KW)
- Please read the manufacturer's instructions carefully before commissioning the ZETA S reducer with T-sensor.
- The reducer may only be installed and commissioned by trained specialists.
- Ensure that all connections and pipes are properly installed and tight before commissioning the reducer.
- Ensure that the reducer is not installed in areas where flammable or explosive gases, vapours or liquids are present.
- Only use approved refrigerants and adhere to the recommended pressure and temperature ranges.
- Maintenance and repair work may only be carried out by trained specialists.
- Observe the applicable national and international regulations and laws.
Operating instructions for ZETA S reducer with T-sensor (1.4 bar to 250KW)
- The ZETA S reducer with T-sensor must be serviced regularly to ensure trouble-free operation and a long service life.
- Ensure that the reducer is sufficiently ventilated during operation.
- Avoid strong winds and direct sunlight on the reducer to prevent overheating.
- Check the pressure and temperature of the refrigerant regularly and ensure that the reducer is operated within the recommended limits.
- Ensure that the reducer is not overloaded and that the capacity of the reducer is sufficient for the application.
Manufacturer contact information
Vaporiser manufacturer
Westport Fuel Systems Italia S.r.l.
Westport Fuel Systems Company
Via La Morra, 1
12062 - Cherasco (Cuneo)
ITALY
zavoli.cesena@wfsinc.com