- Product description
- Technical details
The Solar Data Extender combines the data from up to three solar controllers so that they can be shown on a single display. The familiar LCD display can still be used. It is compatible with the following devices
- Solar charge controllers in SR and MPP technology (from serial no. 14Vxx.xxxxx)
- Battery Charger of the type VBCS Triple
- LCD Solar Computer S (from serial no. 15V40.xxxxx)
- LCD Charge Control S
- VPC Series with Solar Function
- Bluetooth Connector S-BC
Mounting and connection
The Solar Data Extender can be retrofitted at any time. It has three independent inputs (IN1, IN2, IN3). The signals are combined and made available via the output (OUT). A solar display (e.g. LCD Solar Computer S) can be connected there.
It is connected between the Votronic solar charge controller and the solar display (e.g. LCD solar computer S) using the modular cable included in the scope of delivery. The IN1 connection must always be connected, as the power supply for the unit is provided via this connection.
| Nominal voltage (supply via connected devices) | 12 and 24 |
| Operating voltage range [V] | 8 - 32 |
| Current consumption in standby, typical [mA] | 0,7 |
| Current consumption during activity, typical [mA} | 10 |
| Dimensions (WxHxD) in [mm] | 75 x 47 x 24 |
| Weight in [g] | 37 |
| Test mark | CE, E-test (EMC/vehicle directive) |
| Ambient conditions, humidity: max. 95% room humidity, non-condensing | |
| Scope of delivery: 3 pcs. control cable 6-pin 0.5 m long, operating instructions |