Antarion Smart B2B charger up to 120 Ah

The Antarion Smart B2B charger up to 120 Ah is controlled by a microprocessor with 4-stage charging chain. The B2B charger (battery-to-battery charger, also called charge converter or charge booster) charges the supply battery with an optimal characteristic curve while ensuring that the primary battery, starter battery is not discharged unintentionally.

A microprocessor detects the state of the battery to supply the battery with the correct current and voltage (charging characteristic curve). This has the best effect on the charge and the longest life of the battery.

- Intelligent 4-A charger to charge all types of batteries with a capacity of up to 120 Ah.

- Compatible with lithium, gel, AGM and acid batteries.

- Ideal for maintaining battery charge during winterization.

- LED display with charge level indicator

shutdown memory function:

during charging (constant current and follow-up stage), after a power failure, the product can turn on the current charging mode again and restore the original state when the network is restored; the maximum time is 12 hours with battery connection.

When the memory state is off, the power LED is on, the LCD screen is not displayed, and the backlight is off;

Charge mode:

Automatically identify 6V/12V batteries; for 6V batteries, only 6V/1A

SLOW mode is available; for 12V batteries, four charge modes are available,

as follows:

• 6V 1A /SLOW charging mode (default)
• 12V 1A /SLOW charging mode
• 12V 4A /SLOW charging mode
• 12V 4A /LOW TEMP/AGM charging mode (ambient temperature < 10°C)
• 12V 4A/Lipo4 charging mode

The minimum voltages for automatic detection of 6V&12V batteries are 3V and. 7.4V.

Protection:

• Short circuit protection: maintain or return to initialization interface.
• Polarity reversal protection: the LCD will display the signal of polarity reversal.
• Overheat protection

Length 20 cm

Width 7 cm

Height 5 cm

Weight 0.38 g