- Descripción del producto
Frost guard 10
Self-regulating heating cable, 10-20 W/m, with plug.
Frost guard 10 prevents frost damage and the resulting leaks in water pipes. The heating cable has a pre-assembled mains plug that is simply connected to an earthed socket via a residual current circuit breaker. Typical areas of application are drainpipes, water pipes and water meters, for example in holiday homes, garages, greenhouses, caravans and boats. Effective control is achieved with Frostvakt Control. The cable is PVC-free and is also suitable for drinking water pipes. With type approval for drinking water (Kiwa approval 1289).
Use
- For water and waste water pipes, drains and wells
- For internal and external installation
- Approved for drinking water systems
Technical data:
Length (m): 4
Power (W): 40
Connection cable (mm²): 1.0
Connection specification
Supply voltage: 230 V
Connection cable length: 2.0 m
Connection device: Plug
Number of conductors: 2 pcs.
Bending radius, min.: 35 mm
Output: 10 W/m at +10 °C when installed on metal pipes and 20 W/m at +10 °C when installed in water
Exposure temperature (power off), max.: 85 °C
Exposure temperature (power on), max.: up to 65 °C
Installation temperature, min.: -40 °C
Insulation material, inside: EVA, LDPE
Insulation material, outside: ECTFE
Cable type: Self-regulating two-wire with shielding
Protection class: Plug: IP44, cable: IP68
Conductor cross-section: 0.56 mm²
Dimensions: 7.7 * 5.1 mm
Protective conductor: Braided
UV resistance: Yes
Max. Pressure: 8 bar