Landi Renzo MED Injector LPG CNG 4 Cylinder with pressure sensor (old 4-hole version)

LPG injector MED with pressure sensor for injection of LPG or natural gas in LPG conversion & CNG kits.

This is an old 4-hole version!When replacing the old 4-hole version, all injectors in the vehicle must be replaced.

Note: The colour of the injectors can be determined by the cap at the top of the injector (black cap in the photo).

The rail is supplied in individual parts. Delivery consists of:

Size: GI25-20/22/65/80 (yellow/green/black/white)

Homologation number:

Injectors: E13 67R - 010234
Rail mount: E13 67R - 010233

Safety instructions and warnings

Safety instructions for Landi Renzo injector MED LPG CNG 4 cylinder with pressure sensor (old 4-hole version)

- The injector may only be installed and commissioned by qualified specialists.

- Before installation, all national and regional safety regulations and regulations for handling liquid and/or natural gas must be observed.

- The injector must be installed in a well-ventilated area and must not be installed near heat sources or flammable materials.

- It is important to ensure that all electrical components are correctly connected and that there are no damaged cables or plug connections.

- Before installation, the injector must be checked for damage or contamination.

- The injector must be serviced regularly to ensure that it is working properly.

- If there are any signs of malfunctions or problems, the injector must be replaced immediately or checked by qualified specialists.

- It is important to ensure that the injector is only operated with LPG or CNG as recommended by the manufacturer.

Manufacturer contact information

Landi Renzo S.p.A.

Via Nobel, 2

42025 Corte Tegge, Cavriago (RE)

Italy

info@landi.it

Landi Renzo MED Injector LPG CNG GI25-80 WHITE - AMP/Bosch connector