80% filler stop 4-holetank with 90° elbow toroidal tank H270 x 52°

Safety instructions for fill stop valve 80% 4-hole tank with 90° angle tor. H270 x 52°

• The fill stop valve must not be installed in the vicinity of flammable liquids or gases.
• The installation and maintenance of the fill stop valve may only be carried out by qualified personnel.
• The fill stop valve must not be operated without sufficient pressure and temperature equalisation.
• The fill stop valve must be properly installed and secured to prevent accidental loosening or dropping.
• No changes or modifications may be made to the fill stop valve.
• The fill stop valve must not be overloaded. The maximum fill level of 80% of the tank must be observed.
• The fill stop valve must not be used for pressure relief or as a safety valve.
• During maintenance work, the fill stop valve must be completely emptied and flushed.
• The fill stop valve must be checked regularly for leaks and wear.
• In the event of damage or leaks, the filling stop valve must be replaced immediately.