- Product description
- Media & Downloads
LPG injector MED for injection of LPG or natural gas in LPG conversion & CNG kits.
This is a new 12-hole version!When replacing the old 4-hole version, all injectors in the vehicle must be replaced.
| Old (4-hole) | New (12-hole) |
| Yellow | grey |
| green | orange |
| black | blue |
| white | violet |
Note: The colour of the injectors can be determined by the cap at the top of the injector (black cap in the photo).
Technical data
Size: GI25-20 (grey cap) = up to 15 KW/cylinder
Homologation number:
Injectors: E13 67R - 010234
Rail mount: E13 67R - 010233
Safety instructions and warnings
Safety instructions for Landi Renzo LPG injector CNG MED GI25-20 GREY - AMP/Bosch plug
1. before you start installing or servicing the injector, be sure to read the manufacturer's instructions and safety instructions.
2 The injector may only be installed and maintained by qualified personnel.
3. the injector must be properly earthed to reduce the risk of electric shock.
4. ensure that all electrical connections are properly tightened and secured to prevent leaks and short circuits.
5. use only approved sealants and materials during installation.
6. ensure that all gas pipes are free from damage and blockages.
7. all gas lines must be drained before servicing the injector.
8. use suitable protective equipment, such as gloves and safety goggles, during installation and maintenance.
9. the injector must not be installed near sources of ignition, such as naked flames or hot surfaces.
10. ensure that the injector is installed in accordance with local regulations and standards.
Manufacturer Contact information
Landi Renzo S.p.A.
Via Nobel, 2
42025 Corte Tegge, Cavriago (RE)
Italy
info@landi.it
Size: GI25-20 (grey cap) = up to 15 KW/cylinder
Homologation number:
Injectors: E13 67R - 010234
Rail mount: E13 67R - 010233