- Product description
- Media & Downloads
LPG injector MED for injection of LPG or natural gas in LPG conversion & CNG kits.
This is a new 12-hole version!When replacing the old 4-hole version, all injectors in the vehicle must be replaced.
| Old (4-hole) | New (12-hole) |
| Yellow | grey |
| green | orange |
| black | blue |
| white | violet |
Note: The colour of the injectors can be determined by the cap at the top of the injector (black cap in the photo).
Technical data
Size: GI25-80 (violet cap) = from 27.50 KW/cylinder
Homologation number:
Injectors: E13 67R - 010234
Rail mount: E13 67R - 010233
Safety instructions and warnings
Safety instructions for Landi Renzo LPG injector CNG MED GI25-80 VIOLET- AMP/Bosch plug
- Please ensure that the product is only installed by trained personnel.
- The vehicle battery must be disconnected before installing the injector.
- All connections and cables must be properly insulated to prevent short circuits or damage.
- It is important that all instructions from the vehicle manufacturer and all applicable regulations and standards are observed.
- The injector must not be installed near flammable materials or heat sources.
- The injector must not come into direct contact with water or other liquids.
- Regular inspections and maintenance are required to ensure that the injector is working properly.
- If you have any problems or doubts, you should contact an authorised specialist.
- The injector must not be opened or modified as this can lead to dangerous situations.
- Follow the instructions regarding the proper disposal of the injector at the end of its service life.
Manufacturer Contact information
Landi Renzo S.p.A.
Via Nobel, 2
42025 Corte Tegge, Cavriago (RE)
Italy
info@landi.it
Size: GI25-80 (violet cap) = from 27.50 KW/cylinder
Homologation number:
Injectors: E13 67R - 010234
Rail mount: E13 67R - 010233