80% filler stop 4-hole tank with 90° elbow for toroidal tank H200/204 x 52°

Safety instructions for fill stop valve 80% 4-hole tank with 90° angle tor. H200/204 x 52°

• The fill stop valve may only be installed by qualified personnel.
• Before installation, it must be ensured that the valve is suitable for the intended area of application.
• During installation and operation of the valve, the applicable safety regulations and rules must always be observed.
• It is important that the valve is regularly maintained and inspected to ensure safe and efficient performance.
• No changes or modifications may be made to the valve unless performed by a qualified technician.
• The valve must be properly stored and protected from damage.
• It is important that the torques and tightening torques specified by the manufacturer are used when installing the valve.
• The valve must not be overloaded.
• In the event of any problems with the valve, the manufacturer or qualified service personnel must be contacted.
• The valve must be removed from the tank in a safe and orderly manner.