Landi Renzo Injector MED LPG CNG 3 Cylinder GI25-80 WHITE with pressure sensor (old 4-hole version)

LPG injector MED with pressure sensor for injection of LPG or natural gas in LPG conversion & CNG kits.

This is an old 4-hole version!When replacing the old 4-hole version, all injectors in the vehicle must be replaced.

Note: The colour of the injectors can be determined by the cap at the top of the injector (black cap in the photo).

The rail is supplied in individual parts. Delivery consists of:

Size: GI25-80 (white cap) = from 27.50 KW/cylinder

Homologation number:

Injectors: E13 67R - 010234
Rail mount: E13 67R - 010233

Safety instructions and warnings

Safety instructions for Landi Renzo injector MED LPG CNG 3 cylinder GI25-80 WHITE with pressure sensor (old 4-hole version)

The injector may only be installed by qualified specialists.
All electrical connections must be disconnected before installing the injector.
The installation kit must not be changed or modified.
All connections must be made correctly in accordance with the manufacturer's instructions.
There must be no sparks or naked flames in the vicinity of the installation location.
The system may only be operated on authorised gas cylinders.
It is important to carry out the pressure and leakage tests in accordance with the manufacturer's instructions.
The pressure sensor must be checked regularly for functionality and accuracy.
It is important to pay attention to unusual noises or vibrations and, if necessary, to take the injector out of operation immediately.
The system must not be operated if faults or irregularities are detected.
Do not attempt to repair or maintain the injector yourself. Always contact qualified specialist personnel.

Manufacturer contact information

Contact manufacturer

Landi Renzo S.p.A.

Via Nobel, 2

42025 Corte Tegge, Cavriago (RE)

Italy

info@landi.it