80% filler stop 4-holetank with 90° elbow cyl. Ø265-375 x 52°

Safety instructions for fill stop valve 80% 4-hole tank with 90° angle cyl. Ø265-375 x 52°

• The fill stop valve may only be installed and serviced by qualified personnel.
• Before installing the valve, make sure that the tank is empty and has been vented.
• Regularly check the condition of the valve and the connected hoses for damage and wear.
• Only use original spare parts from the manufacturer.
• The fill stop valve must not be overloaded. The maximum filling quantity must not be exceeded.
• Always keep the valve and the surrounding area clean and free of dirt.
• Avoid contact with chemical substances that could damage the valve.
• The valve must be properly earthed.
• Ensure that the ambient temperature does not exceed the specified operating range.
• The valve must not be dismantled or modified during operation.
• In the event of problems with the valve, contact the manufacturer or qualified specialist personnel immediately.