Oetiker worm drive clamps 8-12mm / 9mm W2

Product description

Worm drive clamp 126 W2

Band and housing made of stainless steel, material no. 1.4016/UNS S43000 Hexagon head screw made of galvanised steel

Resistant: Improved surface pressure thanks to rolled, burr-free band edges (optimised band exceeds DIN standard 3017)Reliable: No damage to the hose thanks to flanged, burr-free band edges, optimum sealingUser-friendly: One size for different diameters, quick and easy installation using standard screwdrivers or torque wrenches

Clamp design

The Oetiker worm drive clamp is a technically sophisticated multi-range hose clamp with a very large Tension range. Hoses of various diameters can be securely connected with just one size.

The cold-formed bands of this clamp have a slightly convex shape. The height of the threads decreases on both sides - the full thread cross-section is in the centre.

The worm drive clamps of material quality W2 are equipped with a hexagon head screw (SW 7) with cross recess (Phillips). Clamps of material grades W3 and W4 have a hexagon head screw with slotted drive.

Installation recommendations

For professional installation, we recommend using a flexible screwdriver. This ensures secure installation even in places that are difficult to access. Electronically monitored torque screwdrivers should be used for series assembly where high process reliability is required.

Technical data

Tension range	Band width 9mm	Band width 12mm
Static tightening torque
8 - 22 mm	2 + 0.5 Nm
16 - 160 mm	3 + 0.5 Nm
16 - 390 mm		5 + 0.5 Nm
Static test torque
8 - 22 mm	max. 2.5 Nm
16 - 160mm	max. 4.5 Nm
16 - 390mm		max. 6.5 Nm

Safety instructions and warnings

Safety instructions for Oetiker worm drive clamp 8-12mm (diameter range) / 9mm (Band width) W2

1. area of application:

The Oetiker worm drive clamp 8-12mm (diameter range) / 9mm (Band width) W2 may only be used for its intended purpose. Any misuse may result in injury or damage.

2. assembly:

The clamp may only be installed by trained personnel. Please follow the manufacturer's installation instructions. Improper installation may result in damage or leakage.

3. operation:

The Oetiker worm drive clamp 8-12mm (diameter range) / 9mm (Band width) W2 may only be operated within the specified temperature and pressure range. The clamp must not be overloaded. The clamp must be replaced in the event of damage or material fatigue.

4 Storage and transport:

The clamp must be stored and transported properly. Avoid impacts or other mechanical effects.

Manufacturer Contact information

Contact manufacturer

Oetiker Switzerland AG
Spätzstrasse 11
P.O. Box 358
CH-8810 Horgen
https://www.oetiker.com/de-de/contact-us

EU Contact

Oetiker Germany GmbH
Üsenbergerstr. 13
79346 Endingen
Endingen Germany
https://www.oetiker.com/de-de/contact-us