Truma valve VK3-10 3-way LPG gas manifold 10mm inlet x 8mm outlet

Truma valve VK3-10 3-way LPG gas manifold 10mm inlet x 8mm outlet. Serves as a quick-acting valve to open / close the gas supply for consumer appliances (cooker, hob, refrigerator, boiler, etc.).

The gas block manifold is mounted inside the camping vehicle or boat. A steel line is laid from the gas bottles or the gas tank to the gas manifold block. On the outlet side, the respective gas appliances are supplied.

Attention: Cutting rings/clamping rings and union nuts are not included in the scope of delivery and must be ordered separately. To do this, click on the "Accessories & Spare Parts" button.

What must be observed when installing gas distribution blocks in camping vehicles?

The gas supply from each consumer appliance must be able to be shut off individually. If only one gas consumer is installed in the vehicle, an additional gas distribution block is not necessary. In this case it is sufficient to shut off the gas cylinder valve.

If at least two gas-operated appliances are installed, a gas distribution block must be installed.
The following must be observed:

- It must be possible to assign the individual shut-off sockets to the respective gas appliance. Stickers with pictograms are available separately for this purpose.

- It must be possible to see on the gas distribution block when the valve is open and when it is closed.

- Unused connections on the gas manifold must be sealed with a blind plug + union nut.

- A leak test must be carried out before commissioning.

Inlet 10mm

Output 8mm

Material brass

Gas LPG (propane/ butane)