- Product description
- Media & Downloads
The Truma Combi 6 E heater combines two functions in one device. On the one hand heats the living space on and provides for comfortable temperatures in larger caravans and motor homes. On the other hand, it heats water in a ten liter stainless steel water tank, which can be used for showering or cooking.
The Combi 6 E heater contains integrated electric heating elements, making heating possible with gas, electricity or mixed. For operation during a stationary stay, the heater can be operated with the 12V power supply.
Thanks to the asymmetrical shape of the water tank, the water is heated uniformly in about 20 minutes to 60 degrees.
When the outside temperature is low, the water tank is also heated. At a warmer outside temperature, the water can be heated even without heating the living space with.
Thanks to the four air outlets, the heated air flows almost noiselessly into the vehicle and provides an optimal warm air distribution.
Efficient: low energy consumption
Practical: easy operation via digital control panel CP plus iNet ready
Saving space: light and compact design allows flexible installation
Comfortable: Automatic climate control possible in conjunction with a Truma air conditioner
To prevent the drain from the water tank from freezing, the drain valve FrostControl is automatically opened at temperatures below 3 degrees and the water is drained impulsively.
Energy source LPG propane / butane + electricity
Operating pressure 30 mbar
Nominal heat output gas operation 2000 W / 4000 W / 6000 W
Nominal heat output electric operation 900 W / 1800 W
Nominal heat output mixed operation max. 6900 W
Fuel consumption 160 - 460 g/h
Current consumption (at 12 V): Operation heating and water tank short-term max. 6.5 A (average approx. 1.4 A)
Current consumption (at 230 V) 3.9 A / 7.8 A
Water capacity 10 liters
Heating time (from approx. 15 °C to approx. 60 °C): Water tank approx. 23 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heating and water tank according to EN 15033 ca. 80 min.
Weight ca. 15.5 kg
Dimensions (L x W x H) 510 x 450 x 300 mm
Installation dimensions (minimum dimensions - depending on the installation situation, additional space for gas connection, water connections and safety/drain valve must be taken into account) (L x W x H) 540 x 500 x 350 mm
Current consumption (at 12 V): Heating water tank max. 0.4 A
Air flow rate (free blowing) max. 287 m3/h
Resting current approx. 1 mA
Resting current consumption CP plus (optional) 3 mA
FrostControl heating element (optional) max. 0.4 A
Pump pressure max. 2.8 bar
System pressure max. 4.5 bar
.