- Product description
Whether in a motorhome, caravan, camper van, food truck/snack van, boat or for other suitable applications: this RV propane tank enables a permanently installed LPG gas supply to be set up.
Advantages:
- ECE R67-01 approval; therefore no 10-year inspection requirement
- No need to change cylinders – independent of returnable gas cylinders
- Automatic 80 per cent fill stop to limit the filling level
- Refuelling at more than 30,000 LPG tanks across Europe
- Suitable for powering compatible gas-powered appliances, e.g. heating, fridge or cooker
- Can be refuelled at any time
The components supplied or included in the set are type-approved in accordance with the ECE R67:01 specifications set out in the product description.
Note on colour: The tank may be supplied in red or black, depending on availability. If the colour is important to you, please enquire about the currently available version before placing your order. Unless otherwise agreed in advance, the tank will be supplied in either red or black; the colour does not constitute grounds for a complaint.
Safety and warning notices
Notes:
- The LPG tank must only be used for the intended LPG application and within the scope of its type-approval.
- Installation, connection, commissioning, maintenance and repair must only be carried out by qualified specialist personnel in accordance with the applicable regulations and the manufacturer’s instructions.
- The LPG conversion kit must be completely depressurised before any installation or maintenance work is carried out. Keep away from open flames, sparks, smoking and other sources of ignition.
- The tank, valves and fittings must not be modified without authorisation, subjected to mechanical processing or used for purposes other than those for which they are intended.
- Only suitable and approved fittings, pipes, fastenings and other components may be used.
- The tank must be installed correctly, without any tension, and protected against slipping, mechanical damage, abrasion, corrosion and excessive heat.
- Before initial commissioning and following any installation, maintenance or repair work, the entire LPG conversion kit must be checked for leaks and proper functioning.
- The operating, testing and approval data specified on the tank must be observed. Overfilling or impermissible pressure or temperature loads must be avoided.
- If you smell gas or detect a leak, shut off the gas supply immediately. Avoid sources of ignition, ventilate the area and have the system inspected by qualified personnel before further use.
- If there is visible damage, severe corrosion, deformation or any doubts regarding operational safety, the tank must not be used any further.
- The tank’s markings and type plate must remain permanently legible and must not be removed or covered.
Manufacturer’s contact details
Manufacturer:
STAKO Sp. z o.o. (a Westport Fuel Systems company)
ul. Pozna?ska 54
76-200 S?upsk
Poland
Telephone: +48 59 842 48 95
Email: poland.sales@wfsinc.com
https://stako.pl