Manifold nozzles and screw-in fittings form the end point of LPG and CNG injection: they are screwed into the intake manifold and take the gas hose from the injector. HybridSupply stocks DREHMEISTER® nozzles, straight and at 90 degrees, original MTM nozzles from BRC, feed-throughs for polyamide hose, inliners and petrol injector adapters.
The screw-in nozzle is screwed directly into the intake manifold and serves as the connection for the gas line from the injector. If the possible installation point is not suitable, inliners or feed-throughs move the injection point: with the DREHMEISTER feed-through, a heat-resistant polyamide hose is inserted into the manifold in a controlled way without being drawn in, and acts as an extended injector nozzle closer to the inlet valves. According to BRC, the inliners are intended for cases where the structurally possible position of the nozzles does not match the desired injection point.
The 5 or 6 mm hose connection must match the nozzle on the injector. Matching gas hoses and polyamide hoses are listed under mounting material, and the DREHMEISTER screw-in nozzles also on the brand page DREHMEISTER manifold nozzles.
Orders are placed through a company account – net prices are only visible there. Private gas system owners can use the contact form to be put in touch with a trade partner and a workshop that will carry out the installation.