- Product description
Dekaseal 8936 is a high-quality, permanently tacky sealing compound designed for OEM/professional use. The areas of use and application are diverse and can be extended as required.
To date, Dekaseal 8936 has been used in bus, caravan, motorhome, commercial vehicle and even train construction.
The sealant must always be applied between a mechanical connection.
Colour: anthracite/light grey/black
Content: 560 ml
Packaging: Bag
Areas of application:
Substrates: ABS, aluminium, sheet metal, wood, paints, OMMA, PMMA, plywood, etc.
Sealing of: Cover strips, drains, superstructures, Bore holes, roof structures, culverts & openings, rubber - glass connections, flaps, pipes, holes, mouldings, etc.
Installation of: Windows, skylight domes, etc. in caravan windows, wagon, container construction.
And much more...
Resistance to, among other things: Water, road salt, weather influences.
Proper application:
The sealant can be applied using a hand or compressed air gun (2-3 bar required).
The substrate must be clean, dry and free of grease. Excess material can be dabbed off after installation without leaving any residue.
The sealant remains slightly sticky after drying, but is odourless and compatible with paint.
Technical data
Dekaseal 8936 cannot be painted over
Base material : Polyisobutene, synthetic resins, fillers and solvents
Consistency : Paste
Curing/setting : Evaporation of solvent
Specific density (20°C), DIN 51757 : approx. 1.4 kg/litre
Very low water vapour permeability (0.1-0.2 gram/day/m²).
Open time (20°C/50% rel. LF) : approx. 3 hours
Solids content (DIN 53216, 3 hours at 120°C): approx. 89%, depending on colour
Viscosity (20°C, flowmeter, 49ml, 2bar, nozzle 4 mm): approx. 40 seconds, depending on colour
Temperature resistance : -30°C to +100°C
Application temperature : +5°C to +35°C
UV and weather resistance : excellent
Safety instructions and warnings
Safety instructions for Dekalin Dekaseal 8936 (bag) 560 ml
1. always read the label and product information before use
2 The product is intended for experienced users only.
3. the product is not suitable for human consumption
4. avoid direct contact with skin and eyes
5. avoid inhalation of the product.
6. in case of contact with skin or eyes, rinse thoroughly with water and seek medical advice if necessary.
7. the product must be stored in a cool, dry place and protected from sunlight.
8. the product must not get into the hands of children.
9. the product must be disposed of in accordance with local regulations.
Manufacturer Contact information
Manufacturer Contact
DINOL GMBH
Pyrmonter Street 76
D-32676 Lügde
info@dinol.com