- Product description
- Media & Downloads
Sturdy mounting frame for mounting Cylindrical LPG tanks inside the vehicle, on the loading area of pickups or commercial vehicles when retrofitting LPG kits.
The mounting frame is ECE R67.01 compliant. It can also be used to securely fasten cylindrical camper propane tanks or LPG tanks.
All mounting frames are supplied with tensioning straps.
Important! Many mounting frames available on the market do not fulfil the R67.01 specifications as the tensioning straps or the frame itself do not meet the requirements of the standard.
Technical data
incl. 4 straps (67R-01 compliant)
Width of the individual straps: 50mm
Thickness of the individual straps: 3mm
Fixing screws: 1 x M10 + 2 x M8
Safety instructions and warnings
Safety instructions for mounting frame Ø 400/130L for Cylindrical LPG tanks, RV propane tanks, camper propane tanks - R67.01 compliant
1. installation:
- The mounting frame must be installed in accordance with the manufacturer's instructions.
- The frame must be mounted on a flat surface.
- Installation should be carried out by a qualified person.
2. maintenance:
- The mounting frame must be serviced regularly to ensure proper functioning of the frame.
- Maintenance should only be carried out by a qualified person.
- Maintenance should be carried out in accordance with the manufacturer's instructions.
3. use:
- The mounting frame should only be used for its intended purpose and in accordance with the manufacturer's instructions.
- The frame must not be overloaded.
- The frame must be checked regularly for damage.
4. safety:
- The mounting frame must be securely and stably fastened to ensure proper function of the frame.
- The frame must not be damaged or corroded.
- When handling LPG, fuel gas or motorhome gas, the applicable safety regulations must be observed.
Manufacturer contact information
Manufacturer contact
Grodkowskie Zak?ady Wyrobów Metalowych S.A
ul. Wroc?awska 59
49-200 Grodków
gzwm@gzwm.com.pl
Includes 4 straps (67R-01 compliant)
Width of each band: 50mm
Thickness of each band 3mm
Fixing screws: 1 x M10 + 2 x M8