- Product description
Dekaseal 8936 is a high-quality, permanently tacky sealing compound designed for OEM/professional use. The areas of use and application are diverse and can be extended as required.
To date, Dekaseal 8936 has been used in bus, caravan, motorhome, commercial vehicle and even train construction.
The sealant must always be applied between a mechanical connection.
Colour: Anthracite
Content: 560 ml
Packaging: Bag
Areas of application:
Substrates: ABS, aluminium, sheet metal, wood, paints, OMMA, PMMA, plywood, etc.
Sealing of: Cover strips, drains, superstructures, Bore holes, roof structures, culverts & openings, rubber - glass connections, flaps, pipes, holes, mouldings, etc.
Installation of: Windows, skylight domes, etc. in caravan windows, wagon, container construction.
And much more...
Resistance to, among other things: Water, road salt, weather influences.
Proper application:
The sealant can be applied using a hand or compressed air gun (2-3 bar required).
The substrate must be clean, dry and free of grease. Excess material can be dabbed off after installation without leaving any residue.
The sealant remains slightly sticky after drying, but is odourless and compatible with paint.
Technical data:
Dekaseal 8936 cannot be painted over
Base material : Polyisobutene, synthetic resins, fillers and solvents
Consistency : Paste
Curing/setting : Evaporation of solvent
Specific density (20°C), DIN 51757 : approx. 1.4 kg/litre
Very low water vapour permeability (0.1-0.2 gram/day/m²).
Open time (20°C/50% rel. LF) : approx. 3 hours
Solids content (DIN 53216, 3 hours at 120°C): approx. 89%, depending on colour
Viscosity (20°C, flowmeter, 49ml, 2bar, nozzle 4 mm): approx. 40 seconds, depending on colour
Temperature resistance : -30°C to +100°C
Application temperature : +5°C to +35°C
UV and weather resistance : excellent
Safety instructions and warnings
Safety instructions for Dekalin Dekaseal 8936 Anthracite (bag) 560 ml:
1. read the manufacturer's instructions carefully before use.
2. wear suitable protective equipment, such as gloves and safety goggles, when working with the product.
3. avoid contact with skin and eyes. In case of contact, rinse thoroughly with water and seek medical advice if necessary.
4. the product must not be swallowed. Keep out of reach of children and animals.
5. store the product in a cool, dry place and keep it away from sources of heat.
6. avoid contact of the product with open flames or sparks.
7. use the product only in well ventilated areas to avoid inhalation of vapours.
8. dispose of the product in accordance with local waste disposal regulations.
9. if you have any questions or uncertainties regarding the use of the product, contact the manufacturer or a specialist.
Manufacturer Contact information
Manufacturer Contact
DINOL GMBH
Pyrmonter Street 76
D-32676 Lügde
info@dinol.com