- Product description
- Media & Downloads
Plus Distributor 8
Powerful plus distributor with six fused outlets of different strengths.
The positive feed line from the battery is connected to a solid screw block with cable lug (cable cross-section 16 mm², total current carrying capacity max. 96 A). The distribution takes place on:
| Connection 1: | Screw block with cable lug (16 mm²) and strip fuse 40 A, 50 A or 60 A, with LED display, as main fuse or for larger consumers such as inverters up to 12 V / 600 W or 24 V / 1200 W, powerful chargers etc. |
| Connection 2: | Screw terminal 6 mm² with flat plug fuse 30 A, e.g. for medium consumers or chargers. This branch can be supplied separately from the main circuit via an internal jumper or optionally separately from the other circuits via a second 6 mm2 screw terminal. |
| Connection 3-6: | Screw terminals with large clamping range (4 mm², max. 20 A) and fuse holder for commercially available FKS fuses in the strengths 1 A to 20 A; the scope of delivery includes the strengths 1 x 30 A and 2 x 15 A and 2 x 10 A. |
The cover with cable guide comb ensures a secure hold for the cables and a clean appearance. The monitoring LED for the strip fuse of connection 1 is visible even when the distributor housing is fitted. Labelling fields on the housing allow the plug-in fuses to be reliably assigned. Suitable for 12 V and 24 V operation.
Technical data
Battery voltage: 12 and 24 V
Dimensions (W x H x D): 90 x 38 x 60 mm
Weight: 95 g
Test mark: CE, E-test (EMC/vehicle directive)
Scope of delivery: Flat plug fuses 1 x 15 A, 1 x 10 A and 4 x 7.5 A, operating instructions
Safety instructions and warnings
Safety instructions for Votronic Plus-Distributor 8, circuit distributor:
1. electrical safety:
The Votronic Plus-Distributor 8 is only approved for use on a 12V system voltage. Never connect it to a higher voltage. Also avoid operating the Plus Distributor in a damp or wet environment. Always switch off the system before carrying out maintenance work.
2. fire hazard:
Do not place the Plus Distributor near highly flammable materials, as the Votronic Plus Distributor 8 can catch fire if it overheats. Also avoid exposing the device to direct sunlight.
3. overloading:
Do not overload the Plus Distributor by connecting devices that draw more current than the device can handle. This can damage the appliance. Only use the Plus Distributor for its intended purpose and follow the manufacturer's instructions.
4 Installation:
Install the Plus Distributor according to the manufacturer's instructions and ensure that it is securely and stably fastened. Check the cabling regularly for damage or wear and carry out maintenance work if necessary.
Manufacturer contact information
Manufacturer Contact
VOTRONIC Elektronik-Systeme GmbH
Johann-Friedrich-Diehm-Str. 2
36341 Lauterbach
https://www.votronic.de/kontakt/