DREHMEISTER connecting piece M20 x 1.5 to 8 mm RVS

• Check the reducer for visible damage or defects before installation.
• Only use for the intended purpose in conjunction with 8 mm pipework and M20x1.5 threads.
• The connector must be sealed with a suitable thread sealant.
• Ensure that the system is depressurised before installation.
• After installation, carry out a leak test in accordance with the applicable regulations.
• Do not overtighten or mechanically overload the reducer to avoid material stresses.
• Carry out regular inspections for leaks and mechanical integrity.
• If defects or leaks are detected, replace the component immediately.

©HybridSupply