LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter
LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter

LPG-FIT thermoplastic hose XD-5 (8 mm – corresponds to 10 mm copper) – per meter

Article no.: 108409
Manufacturer: LPG-FIT

Offer is exclusively for commercial customers. Prices are only visible after login.

Variants:
  • Product description
  • Accessories

LPG-FIT XD-5 thermoplastic hose, 8 mm – equivalent to a 10 mm copper pipe – sold by the metre

This thermoplastic hose offers a flexible alternative to rigid 10 mm copper pipes in LPG kits. Among other things, it is suitable for use as a filling hose for LPG tanks and refillable gas cylinders, and is also used in PRINS and VIALLE autogas systems. Suitable XD-5 fittings are required for connection.

Contents

  • LPG-FIT XD-5 thermoplastic hose, sold by the metre

Technical specifications

  • Manufacturer: LPG-FIT / Solution-Fit B.V.
  • Type: XD-5
  • Design: thermoplastic LPG hose
  • Equivalent size: corresponds to a 10 mm copper pipe
  • Inner diameter: 8.0 mm
  • Outer diameter: 12.2 mm
  • Bend radius: 90 mm
  • Weight: 65 g/m
  • Inner core: Nylon (polyamide 6), chemically bonded to the reinforcement
  • Outer sheath: Nylon (polyamide 6), black
  • Working pressure of the hose according to the manufacturer: 90 bar
  • Burst pressure test: 370 bar
  • Operating temperature: -40 °C to +125 °C
  • Approval: ECE R67-01, Class 1
  • Installation: with matching LPG-FIT XD-5 fittings

 

Safety and warning notices
  • Use only for the intended purpose and in accordance with the manufacturer’s instructions.
  • Installation must only be carried out by authorised qualified personnel in accordance with the applicable regulations for liquefied petroleum gas systems.
  • Observe the permissible pressure and temperature limits of all installed components. The specified burst pressure is not a permissible operating pressure.
  • Observe the minimum bend radius of 90 mm. Do not kink, twist or subject the pipe to sustained stress that could cause deformation or damage.
  • Protect from hot surfaces, open flames and sharp objects.
  • Check for damage before installation and carry out a leak test before commissioning. Do not use damaged pipes.
  • Have the pipe inspected and serviced regularly to detect damage, wear and leaks in good time.
Manufacturer’s information

Solution-Fit B.V.
Werfstraat 11
7553 GZ Hengelo OV
Netherlands
Email: info@solution-fit.com

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.