Valtek cut-off valve Type 07 Input M12x1- 8mm, Output M12x1 AMP

Safety instructions for Valtek shut-off valve type 07 inlet M12x1 (8mm), outlet M12x1 AMP

1 Only qualified personnel should install, maintain and repair the shut-off valve.

2. before starting installation, the shut-off valve must be checked for damage. Damaged or defective components must not be installed.

3. the shut-off valve may only be used in applications for which it is suitable.

4. the shut-off valve must be installed in accordance with the applicable regulations and standards.

5. the shut-off valve must be completely drained and the system depressurised before starting maintenance or repair work.

6. suitable protective equipment such as gloves and safety goggles must be worn when servicing or repairing the shut-off valve.

7. all connections must be checked for leaks before commissioning the shut-off valve.

8 The shut-off valve must not be operated without adequate ventilation.

9. the shut-off valve must not be overloaded. The maximum operating pressure and temperature limits must be observed. 10.

10. the shut-off valve must not be used if it is damaged or leaking.