Gas connection M12x1 / Ø12mm for Magic III power reducer (straight)

Safety instructions for gas connection M12x1 / Ø12mm for Magic III Power reducer (straight)

- The gas connection may only be installed by qualified personnel.

- Before installation, it must be ensured that all parts of the gas connection and the reducer are free from damage.

- The gas connection must be properly secured and fastened to prevent twisting or loosening during operation.

- Only suitable tools may be used to fit or remove the gas connection.

- The gas connection must be checked regularly for leaks and damage. If there are signs of leaks or damage, the gas connection must be replaced.

- The gas supply must be completely opened before the gas connection and reducer are put into operation.

- Sufficient ventilation must always be ensured when the reducer is in operation to prevent the build-up of gases.

- If there is a smell of gas or other signs of gas leakage, the gas supply tap must be closed immediately and qualified personnel must be informed.