- Product description
Dekalin Dekavator 30 ml
The adhesion activator from Dekalin is suitable for treating surfaces with a low surface tension (mostly plastics). This ensures a permanent bond and prevents the penetration of moisture. The decalcavator acts as a chemical bridge between the part to be joined and the adhesive.
Advantages:
- Fast drying, 5-10 minutes (depending on the surface)
- Cleaning
- Improves adhesion
- Easy handling
Dekalin Dekavator is suitable for pre-treatment of the following materials:
Aluminium
steel
Copper & brass
Painted & powder-coated metal Glass
Polyester (GFK)
ABS
PVC
Technical data:
Solids content : approx. 8% Specific
Density (20°C) : approx. 0.76 kg/litre
Flash point : approx. 9°C
Drying time (20°C/50% R.H.) : approx. 5 minutes
Colour : transparent
Storage : between +5°C and +30°C cool and dry, protected from direct sunlight
Safety instructions and warnings
Safety instructions for Dekalin Dekavator - 30 ml:
1. read all instructions and warnings carefully before use.
2. keep the product out of the reach of children.
3. avoid contact with eyes and skin. In case of contact, rinse with water.
4 Do not swallow. If swallowed, seek medical advice immediately and show the packaging or label.
5 Protect the product from heat and direct sunlight.
6 Use only in well ventilated areas.
7 Do not use near open flames.
8 Do not inhale the product or vapour.
9. contact the manufacturer if you are unsure or have questions about the use of the product
10. dispose of the product properly in accordance with local regulations.
Manufacturer contact information
Manufacturer Contact
DINOL GMBH
Pyrmonter Street 76
D-32676 Lügde
info@dinol.com