- Product description
The FLE-JC fuel level emulator is designed for use in vehicles (mainly Japanese brands) with a float resistance of 10? - 550? The ECU calculates the amount of fuel consumed based on the injection times and the distance travelled.
AC S.A. recommends the use of the FLE-JC in the vehicles listed below, but cannot guarantee that the emulator will work properly as different manufacturers use different sensors in the same vehicle models.
TOYOTA AVENSIS II 2004 2.0L VVTI D4 147 KW
TOYOTA AVENSIS II 2007 2.0L VVTI D4 147 KW
LEXUS RX 350 2007 3.5L V6 276 KW
MAZDA 6 GH 2008 2.0L 147 KW
MAZDA 6 GH 2010 2.0L 147 KW
Principle of operation
The fuel level indicator is updated each time the engine is started (the fuel level is calculated based on the engine speed).
If the vehicle is parked on a slope, the display is incorrect). The emulation is
emulation is performed within the first two minutes after the engine is started, so a restart is not recommended
while the emulation data is being processed. If the engine is restarted before the emulator is
is completed, there is a risk that the fuel level will be read incorrectly.
Technical data
Technical data Supply voltage: 12V ±25%
Operating temperature: -40°C ÷ +70°C
Protection class: IP66
Safety instructions and warnings
Safety instructions for AC Emulator for petrol tank gauge FLE-JC
1. before installing or servicing the AC Emulator, the vehicle and the AC Emulator system must be completely switched off to avoid electric shocks or other injuries.
2. the AC Emulator is intended for use with petrol tank gauges only. Do not use the device for other applications or in other vehicles.
3. ensure that all connections and cables are correctly connected before using the AC Emulator and that there is no damage to the cables or connections.
4. the AC Emulator must be protected from moisture and humidity. Ensure that the device does not get wet during installation or use.
5. when installing the AC Emulator, all instructions in the operating instructions supplied should be followed. If you have any questions, contact the manufacturer or a qualified technician.
6. ensure that the AC Emulator is installed in a safe place inside the vehicle where it is protected from damage and does not pose a risk to the occupants or the vehicle.
Manufacturer contact information
AC S. A.
15-181 Bia?ystok
ul. 42 Pu?ku piechoty 50
tel.: +48 85 743 81 00
biuro@ac.com.pl