- Product description
DEKAsyl MS-2 is the ideal compromise between adhesive and sealant for the production of elastic connections between components that also require a high adhesive strength.
DEKAsyl MS-2 bonds and seals in one and does not weaken the installed material and leaves no traces of joining elements (screws, etc.)
The MS-2 adhesive sealant can be painted over after skin formation.
The areas of use and application are diverse and can be extended as required.
Colour: White
Content: 290 ml
Packaging: Cartridge
Areas of application:
- Aluminium
- Polysester
- GRP
- PMMA
- Compensation of construction tolerances
- Glass
- Roof hatches and windows
- Wheel panelling
- and much more
Technical data:
Base material: MS Polymer
Curing/sealing: Moisture
Specific density: approx. 1.4 kg/litre
Skin formation time (20°C/50% rel. LF): approx. 10 minutes
Open time (20°C/50% rel. LF): < 15 minutes
Curing after 24 h (20°C/50% rel. LF): approx. 3 mm
Shore A hardness (DIN 53505): approx. 55
Volume change (DIN 52451): < 3%
Adhesive strength (physical rheometer MC100): approx. 300 Pa
(measure of the maximum uncured adhesive quantity that can be applied per m² without running down)
Tensile stress (100%) (DIN 53504/ISO 37): approx. 1.7 MPa
Tensile stress at break (DIN 53504/ISO 37): approx. 2.6 MPa
Elongation at break (DIN 53504/ISO 27): approx. 250%
Shear stress (DIN 53283/ASTM D1002): approx. 2.5 MPa
Tear strength (DIN 53515/ISO 34): approx. 16 N/mm
Solvent content:0%
Isocyanate content:0%
Temperature resistance: -40°C to +120°C
Application temperature: +5°C to +35°C
UV and weather resistance: excellent
Safety instructions and warnings
Safety instructions for Dekalin DEKAsyl MS 2 MS-Polymer Adhesive Sealant 290 ml (white)
- Always read the label and product information before use.
- Only use with adequate ventilation.
- Keep out of the reach of children.
- Avoid contact with eyes and skin.
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- In case of contact with skin, wash immediately with plenty of soap and water.
- If swallowed, seek medical advice immediately and show this container or label.
- Do not allow to enter drains, waterways or soil.
- Do not use near sources of ignition.
- Protect from frost and moisture.
- Dispose of the product and packaging in accordance with national regulations.
Manufacturer Contact information
Contact Manufacturer
DINOL GMBH
Pyrmonter Street 76
D-32676 Lügde
info@dinol.com