Toptron LED switch and display
Toptron LED switch and display
Toptron LED switch and display
Toptron LED switch and display

Toptron LED switch and display

Article no.: 107926
Manufacturer: TOPTRON

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

LEDoffSystemswitched off, throttle supply switched off

LEDgreenSystemswitched on; gas supply switched on, operating cylinder full

LEDredGassupply switched off; inclined position or excessive acceleration values have led to triggering, e.g. in the event of an accident

LEDyellowSystemswitched on; gas supply switched on; operating cylinder empty

LED flashes yellowSelf-check for approx. 2 seconds after switching on

LED flashes redonceValve not connected to the control unit or internal fault

LED flashes redtwiceOvervoltage (supply voltage >15V)
Check batteries if necessary

LED flashes red3 timesUndervoltage (supply voltage <10.0V)
Reset time < 45 seconds; check batteries if necessary

Functional behaviour of the changeover unit

- After checking that the automatic switchover indicator remains green for both lever positions
remains green for both lever positions, turn the arrow to the right or left as required. The arrow on the lever points to the
operating bottle.

- The automatic switchover indicator is red (LED on the remote display is yellow), which means
that the operating cylinder has been used up. The system then works with the
reserve cylinder.

- If the automatic switchover indicator is red (LED on the remote display is yellow), but the operating cylinder
operating cylinder has not yet been completely used up, the changeover process can be cancelled by triggering the
hose rupture protection on the high-pressure hose of the operating cylinder or by
or by blockage of the regulator input, e.g. by dirt particles.

To resetthe system, press the switch on the display unit, which closes the solenoid valve.
closes the solenoid valve. The LED display goes out. After a period of approx. 45 seconds, the system can be restarted by pressing the switch again.
The system can be put back into operation by pressing the switch again.
When decommissioning the system
close the cylinder valves.
If the system is not to be used for a longer period of time, the battery must be disconnected - see the vehicle operating instructions.

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.