- Product description
- Accessories
DREHMEISTER cutting ring fitting as T-piece for LPG thermoplastic hose or thermoplastic line for extending, connecting or splitting high-pressure gas lines (CLASS 1 ECE 67R-01). The LPG thermoplastic hose is mainly used as a gas supply pipe for LPG vehicles. It connects the LPG filling point to the multivalve in the tank and goes from the multivalve to the reducer. A T-piece is required for LPG vehicles with two reducers, for example.
Version for 1/4" (8mm) LPG thermoplastic hose.
Consisting of:
1x T-connection adapter
3x cutting ring
3x union nut
Safety instructions and warnings
Safety instructions for DREHMEISTER T-connection adapter for LPG thermoplastic hose 8-8-8mm
1. only intended for use with LPG thermoplastic hoses 8-8-8mm.
2. all relevant safety precautions must be taken before installing the adapter, including switching off the gas supply system and removing all flammable materials from the working environment.
3 The DREHMEISTER T-connector adapter must be installed by a qualified installer.
4. before installing the adapter, ensure that all parts are in perfect condition and free from cracks or damage.
5 The adapter must not be overloaded and should only be operated in a temperature range between -20°C and 60°C. 6.
6. the adapter should be checked regularly for damage or wear. If there are signs of wear or damage, the adapter must be replaced immediately.
7 The DREHMEISTER T-connection adapter must not be used with other gas connection parts or systems.
8. the gas supply system must be switched off completely when replacing the adapter.
9. the DREHMEISTER T-connection adapter is only intended for use in a well-ventilated area.
