- Product description
Technical data Bigas HS201 injection rail | |
| Working pressure | from 0.2 bar to 3.5 bar |
| Maximum pressure | 4.5 bar |
| Operating voltage | 12 V |
| Inlet connection | ø12mm |
| Connections at the outlet | Pre-drilled nozzles (1.60mm) with 6m outlet |
| Temperature range | -40° / + 120° C |
| Resistance | 2.0 Ohm |
| Homologation | E20 67R-01 0494 E20 110R-00 0011 |
Replaces the predecessors DI21-F and HS200.
Safety instructions and warnings
Safety instructions for Bigas LPG injector CNG HS201 8 cylinder:
1. before installing the Bigas injector, ensure that the vehicle is completely switched off and that there are no naked flames or ignition sources nearby.
2. the injector should only be installed by authorised specialists in order to avoid damage to the vehicle and injury.
3. checking and adjusting the injector should only be carried out in a well-ventilated area to avoid inhalation of gases.
4. it is important that the injector is serviced regularly to ensure proper function and safety.
5. if there is a smell of gas or problems with the injector, the vehicle should be switched off immediately and a specialist contacted.
Manufacturer contact information
Ecomotive S.r.l.
Via Raimondo dalla Costa, 2
41122 Modena (MO) Italy
Tel. +39 01429552
info@ecomotive-solutions.com