- Product description
The SRG gas regulator 552-1 Jumbo enables an 8 mm gas hose to be connected to gas cylinders with a clip-on Withdrawal valve. The pressure regulator regulates the gas pressure so that the desired appliances can be connected.
Inlet: Clip-on (quick coupling) type G.56 - diameter 35mm according to EN15202
Outlet: hose connection for 8mm
Outlet pressure: adjustable 0-2 bar
Advantages:
- Adjustable outlet pressure
- Simple clip-on system for jumbo valves
- incl. safety ring
The SRG Jumbo system was invented and patented by Willy Rackow in 1934.
Safety instructions and warnings
Safety instructions for SRG gas regulator (Clip-On) 552-1 Jumbo 0-2bar G.56 -> 8mm hose:
- The gas regulator may only be installed, operated and maintained by trained personnel.
- Installation must be carried out in accordance with the manufacturer's instructions.
- Before installation, it must be checked whether the pressure regulator is suitable for the intended use.
- Only pressure regulators that are suitable for the respective gas pressure and for the gas to be used may be used.
- The pressure regulator must not be forcibly opened or tampered with.
- No connection may be made between the gas line and the pressure regulator until it has been ensured that all connections are properly tightened and sealed.
- The pressure regulator must be serviced regularly to ensure safe operation.
- If the pressure regulator shows signs of damage or wear, it must be replaced immediately.
- No flammable materials may be stored in the vicinity of the pressure regulator.
- The pressure regulator must not be set up near heat sources.
- The pressure regulator must be stored and transported properly to prevent damage.
Manufacturer contact information
Contact manufacturer
ROTAREX SRG
Industriestrasse 11
35075 Gladenbach
Germany
Email: srg@rotarex.com