SRG gas regulator (clip-on) 552-0 Jumbo 0-2bar G.56 -> 8mm hose
SRG gas regulator (clip-on) 552-0 Jumbo 0-2bar G.56 -> 8mm hose
SRG gas regulator (clip-on) 552-0 Jumbo 0-2bar G.56 -> 8mm hose
SRG gas regulator (clip-on) 552-0 Jumbo 0-2bar G.56 -> 8mm hose
SRG gas regulator (clip-on) 552-0 Jumbo 0-2bar G.56 -> 8mm hose
SRG gas regulator (clip-on) 552-0 Jumbo 0-2bar G.56 -> 8mm hose

SRG gas regulator (clip-on) 552-0 Jumbo 0-2bar G.56 -> 8mm hose

Article no.: 107405A
Manufacturer: SRG ROTAREX
PU: 1000

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

The SRG gas regulator 552-0 Jumbo enables an 8 mm gas hose to be connected to gas cylinders with a clip-on Withdrawal valve. The pressure regulator regulates the gas pressure so that the desired appliances can be connected.

Inlet: Clip-on (quick coupling) type G.56 - diameter 35mm according to EN15202
Outlet: Hose connection for 8mm

Inlet pressure: 16 bar
Outlet pressure: adjustable 0-2 bar

Advantages:

- adjustable outlet pressure
- simple clip-on system for jumbo valves
- incl. safety ring

The SRG Jumbo system was invented and patented by Willy Rackow in 1934.

Safety instructions and warnings

Safety instructions for SRG gas regulator (Clip-On) 552-0 Jumbo 0-2bar G.56 -> 8mm hose:

  • The gas regulator is only suitable for use with propane or butane gas.
  • The gas regulator may only be installed by authorised specialist personnel.
  • The gas regulator must be checked and maintained regularly.
  • No changes may be made to the gas regulator.
  • The gas regulator must be protected from moisture and direct sunlight.
  • The gas regulator must not be stored near flammable materials or sources of ignition.
  • Care must be taken to ensure that the gas regulator is not damaged, as this can lead to gas leaks.
  • If an odour of gas is detected, close the gas regulator immediately and inform the qualified personnel.
  • The gas regulator must be checked for damage before each use.
  • The gas regulator must not be used if it is damaged or shows signs of wear.
Manufacturer Contact information

Contact manufacturer

ROTAREX SRG

Industriestrasse 11

35075 Gladenbach

Germany

Email: srg@rotarex.com

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.