- Product description
The SRG low pressure regulator 591 Jumbo with flow limiter enables an 8 mm gas hose to be connected to gas cylinders with a clip-on Withdrawal valve. The pressure regulator regulates the gas pressure so that the desired appliances can be connected.
Inlet: Clip-on (quick coupling) type G.56 - diameter 35mm according to EN26303
Outlet: Hose connection for 8mm
Inlet pressure: 16 bar
Outlet pressure: 30 mbar
Flow rate per hour: 2 kg/h
Advantages:
- Two-stage design ensures extremely stable flow rate
- No tools required to connect the regulator to the valve
- Seals itself after connection and prevents access to the control mechanism
Incl. flow limiter, which interrupts the gas flow in the event of a broken or disconnected pipe.
The SRG Jumbo system was invented and patented by Willy Rackow in 1934.
Safety instructions and warnings
Safety instructions for SRG gas regulator (clip-on) 591 Jumbo 30mbar G.56 -> 8mm hose with flow limiter
- The SRG gas regulator (clip-on) 591 Jumbo 30mbar G.56 -> 8mm hose with flow limiter may only be installed and connected by qualified personnel.
- The gas regulator may only be installed in well-ventilated areas.
- The gas regulator must not be installed in areas where explosive vapours or gases are present.
- When connecting the gas regulator, all connections must be checked for leaks.
- The hose line must be protected from damage and must not be routed through sharp-edged objects.
- The gas regulator must not be used with gas types or pressure levels other than those specified.
- No changes may be made to the gas regulator.
- Local safety regulations and regulations must be observed when operating the gas regulator.
- The gas regulator must be checked and maintained regularly.
- When replacing the gas regulator, it must be disposed of properly.
Manufacturer contact information
Contact manufacturer
ROTAREX SRG
Industriestrasse 11
35075 Gladenbach
Germany
Email: srg@rotarex.com