- Product description
The SRG Low Pressure Regulator 591 Jumbo enables an 8 mm gas hose to be connected to gas cylinders with a clip-on Withdrawal valve. The pressure regulator regulates the gas pressure so that the desired appliances can be connected.
Inlet: Clip-on (quick coupling) type G.56 - diameter 35mm according to EN26303
Outlet: Hose connection for 8mm
Inlet pressure: 16 bar
Outlet pressure: 30 mbar
Flow rate per hour: 2 kg/h
Advantages:
- Two-stage design ensures extremely stable flow rate
- No tools required to connect the regulator to the valve
- Seals itself after connection and prevents access to the control mechanism
The SRG Jumbo system was invented and patented by Willy Rackow in 1934.
Safety instructions and warnings
Safety instructions for SRG gas regulator (clip-on) 591 Jumbo 30mbar G.56 -> 8mm hose:
1. all manufacturer's instructions must be read carefully and followed before installing and using the gas regulator.
2. the gas regulator may only be installed and serviced by qualified personnel.
3. ensure that the gas regulator is suitable for the specific application.
4. regularly check the condition of the gas regulator and replace it if there are signs of damage or wear.
5. the gas regulator must not be installed below ground level or in areas with high humidity.
6 Ensure that the gas regulator is protected from heat, flames or other flammable materials.
7. use only the recommended 8mm hose for connection to the gas regulator.
8. ensure that all connections are tight and that there are no leaks.
9. keep the gas regulator away from children and unauthorised persons.
10. in the event of operating problems or irregularities with the gas regulator, contact the manufacturer or authorised specialists immediately.
Manufacturer contact information
Contact manufacturer
ROTAREX SRG
Industriestrasse 11
35075 Gladenbach
Germany
Email: srg@rotarex.com